Center your tablet perfectly centered between both backseat headrests for a shared, eye‑level view that keeps both kids comfortable on long trips.
Centered, stable dual-headrest mounting
Unlike single‑arm designs, this setup clamps to both headrest posts at once, letting the tablet hover in the middle so each passenger has a clear line of sight without leaning or fighting over orientation.
The dual anchor system, paired with sturdy aluminum arms and silicone‑lined pads, eliminates the wobble that grabs attention on rough roads. The screen stays in view instead of tipping toward the ceiling during bumps.
Device compatibility isn’t limited by thickness. It grips devices from 4.7 inches up to 12.9 inches, and it accommodates bulky kid cases without requiring edge cleaning or case removal.
Construction relies on an aluminum alloy frame, with an ABS clamp body, silicone‑lined headrest pads, and rubber‑lined jaws that hold the tablet securely without scratching or slipping on bumpy drives.
How to install in under a minute
Step 1: Attach the two clamp brackets to the backseat headrest rods and tighten the knobs—no tools or headrest removal needed.
Step 2: Extend the lower arm and angle it downward so the tablet sits at the passengers’ eye level. Lock the joint firmly.
Step 3: Snap your device into the spring‑loaded grip. Rotate the tablet on the 360° ball joint to portrait or landscape and press play.
Two-arm advantage over single-arm mounts
Centering the display across both headrests prevents one child from leaning over or dictating placement. A dual‑headrest setup stays steady, unlike mounts that wobble or droop on rough patches.
- Spans Both Headrests to center the tablet for both kids
- Steady on Rough Roads — dual clamps plus gear‑locked hinges
- Fits 4.7″–12.9″ Devices with Cases — from phones to iPad Pro
What’s under the hood
- Build: Aluminum‑alloy arms, ABS clamp body, silicone‑lined headrest pads, rubber‑lined device jaws
- Folded Dimensions: 10.8 × 5.0 × 2.2 inches
- Lower-Arm Extension: 2.4 to 10.6 inches
- Headrest Rod Spacing Fit: 0.4 to 6.3 inches apart
- Device Range: 4.7″ to 12.9″ — phones, mini tablets, full-size tablets with most kid cases
- Weight Capacity: Up to 10 kg / 22 lbs
Common questions
- Will this fit my car’s headrests? It clamps to headrest rods spaced 0.4 to 6.3 inches apart, fitting most sedans, SUVs, and pickups. If your vehicle has fixed headrests with no exposed rods, this mount won’t fit.
- Will it hold a 12.9 inch iPad Pro with a kid case on? Yes. The spring‑loaded jaws open to 12.9 inches and grip bulky kid cases securely without slipping.
- Will it stay steady on bumpy roads? The dual‑headrest system with two anchor points and gear‑locked hinges prevents sway, droop, or sideways rotation on rough patches.
- Does it block the driver’s rearview? The lower arm telescopes from 6 to 27 cm, allowing you to position the screen below the rearview line for a clear view.
- Do I need any tools to install? No tools required—just tighten two knobs, clamp on, and snap the tablet in place.